Virgin router or hubs are one of the best networking devices which you just have to connect and run its services. Here, you will get to know about the Virgin router lights, how to set it up and features of it.
Meaning of Virgin Media Router
There are many light colorsyou will see on the media router hub, we will elaborate all of them here;
-
White
Virgin hub 5, 3 and 4 flashes and shows a solid white light. When, it flashes, means that your hub is booting up and this will take 5 minutes to boot. When, it shows solid white light, means your hub is perfectly fine and working fine.
-
Green
Hub 5 and 4 shows the Green color light on Power LED. It is solid, means your hub device is running on the modem mode. If it is flashes green, then it is updating it firmware.
-
Red
Hub 5,4,3, and 2 or 2ac shows the red solid light which means your device is facing a technical issues or something went wrong. When it flashes, it means your hub device is not registered to the Virgin media network.
-
Yellow
Virgin media hub 3, 2, and 2ac shows the yellow light. When you see a yellow color on the power LED it means that your device is working normal.
-
Blue
If your Virgin router flashing blue color, it means you have pressed the WPS button and device is finding a new device to connect. If it shows a solid blue then it means WPS connection has been successfully established.
Now, you will learn how to setup the Virgin media router with the help of simple instructions written below.
Virgin Media Router Setup
You have to connect the hub to the cable modem with the Ethernet cable and then configure it to access its internet services.
Connect to Cable Modem
- Insert the Ethernet cable to the modem LAN port.
- Connect other end to the router WAN port.
- Turn on the router hub and modem and start configuring the device.
Access Interface and Configure
- Connect the computer or laptop to the router network.
- Open the web browser and search the IP address 192.168.0.1.
- Search it by pressing the Enter button, you will get to the interface login page.
- To access the interface, you have to enter the username and password (given in the user manual and on the label).
You will reach to the hub interface where you can adjust all the settings and complete the configurations.
Now, have a look at the features of Virgin media router;
Virgin Media Hub Features
- Easy manageable settings through your phone via Virgin Media Connect app.
- Simple recharge or data packs with My Virgin Media app.
- Enable Virgin Media Parental Controls with easy steps.
- Dual-band system is there in Virgin media hub, which you can change to 2.4GHz and 5GHz through the interface.
- WiFi 6, WPS push button, Default SSID, and WiFi pod compatibility are also some of the easy to access features.
- You can also connect your old Virgin WiFi booster to the new Virgin media router easily.
- If you want to find out low network or dead zones in your home, then you can easily do it via Virgin Media Connect app.
- No technical support needed for setup or access the Virgin router login interface.
The End Words
Here, in this post, you have get to know about the virgin router lights, how to complete its setup and features of it. Hope, you set it up easily without any support.
