You can easily set up your Orbi device and manage various features and settings through the Orbi web interface at orbilogin.net or by using the IP address 192.168.1.1. Accessing it from a laptop or computer is straightforward.
Here’s how to log in to your Orbi router login using your computer. But first, let’s go over what you’ll need:
- Connected PC
- Login URL (orbilogin.net)
- Admin login username and password.
How to Login to Orbi Router?
- Turn on your Orbi router and connect a PC to the router’s network via SSID (wirelessly) or LAN cable.
- Open browser in PC and enter the login URL orbilogin.net or IP address 192.168.1.1.
- Search by pressing ENTER button and Orbi router login page will open.
- To access the interface, type in the Orbi admin username and password.
Note: If you haven’t changed the admin credentials, then use the default credentials, given on the label of the router.
- Click the LOGIN button after typing the credentials and you will get into the interface dashboard.
In case of any error like Orbi login window or page not responding or can’t able to get into the interface, then we will also help you to solve it. Below, we will explain few common errors and there reasons. After that, learn troubleshooting tips and solutions to solve the common errors.
Orbi Login Errors and Reasons
- Orbilogin.net not Working
If orbilogin.net is inaccessible or not working, it may be due to an out-dated web browser or a temporary server outage.
- Browser Saying Site Not Secure
‘Site Not Secure’ warning indicates a potential security risk. It may also be caused by an out-dated browser cache. You can Proceeding the website by clicking ‘Open Anyway,’ but this is not recommended due to the potential security risk.
- Orbilogin Says Password Incorrect
Login failures can occur due to an incorrect or forgotten password. If you haven’t changed admin credentials, then find the default username and password at the label of the router.
- Orbi Showing Purple While Logging into Interface
Purple light on your Orbi indicates of internet disconnection. If the Orbi interface is unresponsive, it may be due to this internet connection loss.
Troubleshooting Orbi Login Issues
- Check Connection with Modem
The modem connects to the router via an Ethernet cable. Verify each end of the cable is plugged into the correct ports: the router’s WAN port and the modem’s LAN port. Ensure the cable is undamaged.
- Make Sure You’ve Searched Correct URL
Orbi router’s login interface can be accessed via orbilogin.com or orbilogin.net. If these URLs are unresponsive, use the router’s default IP address, 192.168.1.1.
- Update Browser and Then Try Login
You should use the Updated web browser to log in to the Orbi interface. Check the browser is up-to-date or not, if not then open the browser settings, select the ABOUT option and click UPDATE.
- Reboot Your Orbi System
To reboot the Orbi router, you have to disconnect its power and connect router with power again. There are two ways to restart the device:
- Plug out the power adapter of the router and plug it in the wall socket again.
- Press the power button twice.
- Reset Orbi Router
At last option to solve the login error is resetting your Orbi router. To reset the device follow these steps:
- There is a RESET pinhole button at the back of the device.
- Use a paper pin or pen and press the RESET button.
- Hold it for 10 seconds and release it.
- Wait for Orbi router ring LED shows solid light.
After that you must re-configure (setup) the router again. Follow these instructions:
- Turn on Your Router
Connect router to modem via Ethernet cable. Plug the cable’s end into router’s WAN port and LAN port of the modem. After that, turn it on.
- Reach Orbi Router Login Page
Link a PC to the WiFi router with the help of Ethernet cable or without any wire (SSID). The SSID details will be default given label on the back of the router.
- Access Interface
Open web browser and enter the login URL orbilogin.net. Search it and interface login page will be loaded. On this page enter the admin default password and click on LOGIN.
- Setup All Settings
The dashboard to create the Orbi new network page will appear. Here, enter the new WiFi name and password. Click on SAVE to finalize the setup.
If still facing any Orbi router login problem, then you can reach out to our experts to help you out.
