The Red light of the Velop node flashes when the node is not connected properly to the router and the node is not getting full power supply. Because of this, your Linksys Velop Child node did not function properly.
This problem is not complicated. You can easily solve this by yourselves at home. In this post, you explore why Linksys Velop child node red light is showing and effective solutions to resolve it.
Common Reasons for Linksys Velop Child node Red Light
The main reason behind the red light is that the node is not getting power supply. But we discuss all the causes, due to which the red light is occurring. Let’s Start
- Interrupted the connection between child node and parent node.
- Any damage in the cables and LAN ports.
- Power outlet not working properly.
- The firmware of your child node or the parent node is corrupted.
- The child node is not plugged properly into the power outlet.
To Fix, Take Steps
Below we discuss the effective troubleshooting tips to fix the Velop child node red light issue. You must follow the steps given below:
Check Hardware Connection
- First of all, check your Velop node is plugged in properly to the power outlet.
- Plug out the node and plug it properly again.
- Check all the Ethernet cables are in good condition and fitted to the ports correctly.
- If any cable or port is damaged, replace it carefully.
- Ensure that your child node is connected to the parent node properly.
To troubleshoot the problem of Velop Red Light, it is also very important that the physical connection is in good condition.
Update the Linksys Velop Child node firmware.
Sometime, the Velop node shows a red light due to outdated firmware. Here you need to update the firmware of the node. Follow the below steps to update.
- To update firmware, install the Linksys app.
- Open the app; if you don’t have an account to login, first create one.
- Select the node that you want to update.
- Click on the setting button and tap on the Upgrade firmware.
- Here, first download the latest firmware and tap on the update node.
You have needed to use the Linksys app to update the firmware. You can also use the Web interface to update, but due to node not working, use the app. On this app, you can set up the Linksys router firewall, which improves the security of your mesh system.
Move the Linksys Velop Child node to a new place.
When the child node is placed out of the range of the main node (router). Also because of this, the Linksys Velop child node shows Red Light. To resolve this, move the child node in the range of the main node. After relocating the child node, reset the child node and sync or connect the child node to the main node again.
Reboot
Many times, the node faces some little problem; to fix this, you just need to reboot the Linksys Velop Child node. To reboot, simply turn off and plug out the node. After a few minutes, turn on again the child node.
Reset
If you are using all the above-given tips or methods, but after that the red light issue is not fixed, then try to reset the node. It will restore the default settings of the node. To reset, simply press the reset button on the node for 5-10 seconds. It will take a few minutes to complete the reset process.
Conclusion
This article helps you to understand the issues of the Linksys Velop child node Red Light. And you also explore the troubleshooting tips to solve these problems.
